The Echo Life HG8245U, an optical network terminal (ONT), is a high-end home gateway in Huawei FTTH solution. By using the GPON technology, ultra-broadband access is provided for home and SOHO users. The HG8245U provides two POTS ports, four GE/FE auto-adapting Ethernet ports and one Wi‑Fi port with 802.11ac standard.
Warning: Last items in stock!
Availability date: 2018-02-26
The Echo Life HG8245U, an optical network terminal (ONT), is a high-end home gateway in Huawei FTTH solution. By using the GPON technology, ultra-broadband access is provided for home and SOHO users. The HG8245U provides two POTS ports, four GE/FE auto-adapting Ethernet ports and one Wi‑Fi port. The HG8245 features high-performance forwarding capabilities to ensure excellent experience with VoIP, Internet and HD video services.
Port: 2POTS+4GE+1USB+WiFi ac.
Plug-and-play (PnP): Internet, IPTV and VoIP services can be deployed by one click on the NMS and on-site configuration is not required.
Remote diagnosis: Remote fault locating is implemented by the loop-line test of POTS ports, call emulation and PPPoE dialup emulation initiated by the NMS.
High speed forwarding: GE line rate forwarding in the bridge scenario and 900 Mbit/s forwarding in the NAT scenario.
Green energy-saving: 25% power consumption is saved with highly integrated system on chipset (SOC) solution, in which, a single chip integrates with PON, voice, gateway and LSW modules.
High-performance forwarding capability provides an optimal terminal solution and future oriented service supporting capabilities for FTTH deployment.
Plug-and-play makes service provisioning easier and more quickly.
Abundant remote diagnosis helps to locate failure more quickly and reduce OPEX.
|FO-HG8245U||ONT GPON 4 GbE Port + 2 telephony + Wifi ac|
|LAN1 - LAN4||Indicates auto-sensing 10/100/1000M Base-T Ethernet ports (RJ-45), used to connect to PCs or IP set-top boxes (STBs).|
|TEL1 - TEL2||Indicates VoIP telephone ports (RJ-11), used to connecting to the ports on telephone sets.|
|USB||Indicates USB host port, used to connect to USB storage devices.|
|POWER||Indicates the power port, used to connect to the power adapter or backup battery unit.|
|ON/OFF||Indicates the power button.|
Indicates an optical port. The optical port is equipped with a rubber plug and is connected to an optical fiber for upstream transmission.
The type of the optical connector connected to the OPTICAL port is SC/APC.
|WLAN||Indicates the WLAN button, used to enable or disable the WLAN function.|
|WPS||Indicates the WLAN protected setup.|
|RESET||Indicates the reset button. Press the button for a short time to reset the device; press the button for a long time (longer than 10s) to restore the device to the default settings and reset the device.|
(length x width x height)
|265 mm x 176 mm x 82 mm|
|Weight||About 1500 g|
Operating temperature: 0°C to +40°C
Environment humidity: 5% RH to 95% RH (non-condensing)
Pressure environment: 86 kPa to 106 kPa
Altitude: 2000 m
Power adapter input: 100 V AC to 240 V AC, 50 Hz to 60 Hz
System power supply: 11 V DC to 14 V DC, 2 A
Static power consumption: 8 W
Maximum power consumption: 20.5 W
Air interface rate
450 Mbit/s (2.4G)
1733 Mbit/s (5G)