The Fujikura 31S fusion splicer is the smallest, lightest, and most portable splicer in the market.
Ideal for FTTH or remote locations.
Warning: Last items in stock!
The robust chassis features shock, dust and moisture protection while the two camera observation system provides for accurate fibre alignment and loss estimation calculations.
Single / SMF(G.652/657), MMF(G.651), DSF(G.653), NZDSF(G.655)
|Cladding dia. / Sheath dia.|
125 μm / Up to 3mm with sheath clamp
5mm to 16mm
|Splice mode / heating mode|
Total 100 splice modes / 30 heating modes
|Typical splice loss*¹|
0.03dB (SM), 0.01dB(MM), 0.05dB(DS) and 0.05dB(NZDS)
|Typical splice time|
6sec SM FAST, 9sec SM AUTO
|Typical tube heating time|
25sec FP-03, coating dia.250μm
|Splice result storage|
Last 10,000 splices
|Viewing methods / magnification|
2 axis 2CMOS camera with 5.0” color LCD. 132X magnification.200X magnification after splicing
1.96 to 2.25N
|Applicable protection sleeve|
60mm, 40mm and Fujikura micro sleeves
|No. of splice / heating per battery full charge|
Typical 200 cycles with BTR-11*²
Typical 5000 splices
|Size / weight|
131W x 201D x 79H mm / 1300g (including battery)
Altitude : 0 to 5,000m above sea level, Wind : 15m/sec*³
Shock resistance : 76cm (30inch) bottom surface drop
PC software upgrade / data management
USB 2.0 (Mini-B type) connector for PC communication.