802.11ac Dual-Band Long Range Access Point | IP-COM


New product

  • MU-MIMO for high throughput.
  • Up to 1317 Mbps dual-band data rate.
  • 24V0.5A Passive PoE or IEEE 802.3at Gigabit PoE Port.
  • Wireless coverage up to 200 meters.


More details

57,04 €

Add to wishlist

Data sheet

Free BandIP-COM

More info

802.11ac Dual-Band Long Range Access Point | IP-COM

Compliant with IEEE 802.11ac, iUAP-AC-LR is a gigabit dual-band ceiling access point, offering a concurrent data rate as high as 1317 Mbps. Powered by MU-MIMO technology, a single iUAP-AC-LR can simultaneously communicate with multiple clients, greatly improving throughput and enhancing user experience. The built-in omni-directional antennas optimize signal radiating directions and broaden the wireless coverage of a single AP. iUAP-AC-LR can be powered by PoE sourcing equipment that compliant with IEEE 802.3at. With ceiling installation design and sleek appearance, iUAP-AC-LR simplifies wireless networking for enterprises, hotels and other public indoor spaces.


Frequency band 2.4 GHz, 5 GHz
Wireless standards IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
2.4 GHz data rate 1 - 450 Mbps
5 GHz data rate 6 - 867 Mbps
Ethernet port 1*10/100/1000 Base-TX port
Button 1*Reset
LED indicator 1*Power
Max. power consumption 13.5W (Full-load)
Power supply standard IEEE 802.3at & 24V, 0.5A Passive PoE
Antenna gain 3*4 dBi
2.4 GHz Max. output power 29 +/- 1.5 dBm
5 GHz Max. output power 26 +/- 1.5 dBm
802.11b RX sensitivity -94 dBm
2.4 GHz 802.11n (MCS7) RX sensitivity -73 dBm
5 GHz 802.11a RX sensitivity -93 dBm
5 GHz 802.11n (MCS7) RX sensitivity -74 dBm
Dimensions 176*176*43.5 mm

Gigabit internet connection for ultra-fast experience

Up to 1317 Mbps dual-band data rate and the Gigabit Ethernet port offer you ultra-fast internet connections.

IEEE 802.11ac Wave2 and MU-MIMO

Compliant with IEEE 802.11ac Wave2 and powered by MU-MIMO technology, a single iUAP-AC-LR can communicate with multiple wireless clients at one time, letting you enjoy higher throughput and better experience.

Dual-band for more connected clients

iUAP-AC-LR allows clients supporting either 2.4 GHz or 5 GHz band, or both to connect to it at the same time, tripling the quantity of connected clients of traditional single-band AP.

Built-in omni-directional antennas.

Built-in high-gain omni-directional antennas guarantee a broader and stable coverage.

Built-in RF for intelligent optimization.

Featuring various anti-interference algorithms, the built-in RF enables iUAP-AC-LR to evenly allocate bandwidth resources for multiple users, filter interference, and optimize data rate, offering you a guaranteed signal strength and reliable wireless experience.

VLAN tagging for SSID.

iUAP-AC-LR allows you to set multiple SSIDs and add VLAN tags for SSIDs, thus protecting your network.

Standard PoE sourcing and DC power supply for easy deployment.

You can use an IEEE 802.3at-compliant PoE sourcing equipment, or a 24V DC power adapter to power on iUAP-AC-LR.

Centralized management.

The iUniFi Controller makes it easy to manage and monitor the whole iUniFi devices in a real-time manner and cloud services enable a remote and secure access free from the restrictions of device location.

Download: Data Sheet, Installation Guide, Firmware,... here.