HDMI switch, 4 inputs and 4 outputs with remote control


New product

Hdmi switch with 4 inputs and 4 outputs with remote control to select the active input on each output. enrackable

RS232 and R J-45 input for command control

It sends audio/video signal of 4 different devices up to 4 outputs for 4 different receptors. Transmits audio and video in full HD (1080p)

Ideal for connecting multiple devices to your TVs and projectors at the same time.

More details

504,00 €

Add to wishlist

Data sheet

Cables, Connections & ToolsHDMI

More info

This unit is a full routing type 4-by-4 HDMI matrix. It allows any source (Blue-Ray player, HD DVD player, satellite receiver, game system, etc.) to be shown on any display no matter the source is HDCP or not. Extra infrared receiver extension,
RS232 port and CAT5e port are supplied for remote control. It has the ability of
equalization and amplification to ensure HDMI signal's transmission through
long cable without quality loss. It offers solutions for digital entertainment center,
HDTV retail and show site, HDTV, STB, DVD and Projector f, data center control, information distribution, conference room presentation, school and corporate training environments.


  • Easy to Use: Install in seconds, no need for setting.
  • Allows up to four HDMI video devices to be independently switched to four HDMI monitors, HDTVs or projectors.
  • The four outputs could show the same or different source at the same time no matter the source is HDCP or not
  • Audio: LPCM, Dolby-AC3, DTS7.1, DSD/Dolby TrueHD/DTS-HD master Audio; HDMI video color format: deep color 24bit/36bit;.
  • Support high definition resolutions 1080p, 1080i, 720p and standard video format.
  • Operation modes IR remote, RS232 and manual .
  • With extra infrared receiver extension.
  • True HDMI V1.3b and HDCP compatible.
  • Max transmission: 10 meters by 28AWG cable, 15 meters by 26AWG cable.