No products
Prices are tax excluded
S6730-H24X6, 24 Port 10GE SFP+ Switch with 6x40GE/100GE QSFP28 | Huawei
HUA-S6730-H24X6C
New product
S6730-H24X6, 24 Port 10GE SFP+ Switch with 6 ports 40GE/100GE QSFP28 | Huawei
HUA-S6730-H24X6C
Data sheet
| Networking and Wireless | Switch |
More info
S6730-H24X6, 24 Port 10GE SFP+ Switch with 6x40GE/100GE QSFP28 | Huawei
10GE SFP+ optical port. A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s. Table 4-188 describes the attributes of a 10GE SFP+ Ethernet optical port.
40GE/100GE QSFP28 optical port. A 40GE/100GE QSFP28 optical port sends and receives service traffic at 40 Gbit/s or 100 Gbit/s. Table 4-189 describes the attributes of a QSFP28 optical port.
Professional Managed Switch Series for operators and integrators, 10 Gigabit Series.
Ideal for professional installations for CPDs centres, hospitality environments, access point management.
They are intended for mass flow traffic environments requiring professional management.
* Including all standard software licenses.
On request, depending on configuration.
*Request a quote from tecnico@anvimur.com
Features
The CloudEngine S6730-H offers 10 GE connectivity for enterprise campuses, carriers, higher education institutions and governments. By integrating native WLAN AC capabilities to support up to 1024 WLAN APs, the CloudEngine S6730-H allows you to converge your wired and wireless networks to simplify operations. It also offers free mobility to deliver a consistent user experience and VXLAN-based virtualisation to create a multi-purpose network. With integrated security probes, the CloudEngine S6730-H supports network-wide abnormal traffic detection, encrypted communications analysis (ECA), and threat deception.
- Power Supply Configuration: The S6730-H24X6C can use a single power module or double power modules for 1+1 power redundancy. Pluggable AC and DC power modules can be used together in the same switch.
- Heat Dissipation: The S6730-H24X6C uses pluggable fan modules for forced air cooling. Air flows in from the front side and exhausts from the rear panel.
Specifications
| Item | Description |
| Memory (RAM) | 4 GB |
| Flash | 2 GB in total. To view the available flash memory size, run the display version command. |
| Mean time between failures (MTBF) | 62.27 years |
| Mean time to repair (MTTR) | 2 hours |
| Availability | > 0.99999 |
| Service port surge protection | N/A |
| Power supply surge protection | Using AC power modules: ±6 kV in differential mode, ±6 kV in common mode Using DC power modules: ±2 kV in differential mode, ±4 kV in common mode |
| Dimensions (H x W x D) | Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.4 in. x 16.5 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the handle on the rear panel): 43.6 mm x 442.0 mm x 446.0 mm (1.72 in. x 17.4 in. x 17.6 in.) |
| Weight (with packaging) | 8.9 kg (19.62 lb) |
| Stack ports | Any 10GE SFP+ ports (a maximum of 16 physical ports) Any 40GE/100GE QSFP28 ports (a maximum of 6 physical ports) |
| RTC | Supported |
| RPS | Not supported |
| PoE | Not supported |
| Rated voltage range | AC input: 100 V AC to 240 V AC, 50/60 Hz High-Voltage DC input: 240 V DC DC input: -48 V DC to -60 V DC |
| Maximum voltage range | AC input: 90 V AC to 290 V AC, 45 Hz to 65 Hz High-Voltage DC input: 190 V DC to 290 V DC DC input: -38.4 V DC to -72 V DC |
| Maximum power consumption (100% throughput, full speed of fans) | 254 W |
| Typical power consumption (30% of traffic load, tested according to ATIS standard) | 149 W |
| Operating temperature | -5°C to +45°C (23°F to 113°F) at an altitude of 0-1800 m (0-5906 ft.) NOTE: When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). The switch cannot be started when the ambient temperature is lower than 0°C (32°F). The operating temperature of the switch is -5°C to 40°C (23°F to 104°F) when it uses QSFP-100G-ER4 optical module. |
| Storage temperature | -40°C to +70°C (-40°F to +158°F) |
| Noise under normal temperature (27°C, sound power) | < 65 dB(A) |
| Relative humidity | 5% to 95%, noncondensing |
| Operating altitude | 0-5000 m (0-16404 ft.) |
| Certification | EMC certification Safety certification Manufacturing certification |
| Part number | 02352FSG 02352FSG-001 02353GFC 02353GFC-001 |
