No products
Prices are tax excluded
HD modulator HDMI-DVB-T
002-35100
New product
HTT 103 digital modulator from Fagor, distributor of HDMI signal modulated in COFDM, DVB-T ...
Designed for the distribution of HDMI signals from a terrestrial or satellite television receiver, DVD or Blue-Ray players, digital cameras, etc., in a coaxial network, modulated in COFDM.
Data sheet
| Reception and Modulation | Video headend |
More info
HD modulator HDMI-DVB-T Fagor
This equipment modulates a HDMI video signal into COFDM standard DVB-T HD. The output frequency can be programmed between 50 and 862 MHz. The encoding of the output format is H.264.
It allows distributing signals coming from terrestrial or satellite television signal receivers, Blu-Ray, DVD players or digital cameras with HDMI output, in a TV network with coaxial cable.
It is possible to install more than one modulator in series.
Characteristics
- Compact size.
- HDMI input.
- COFDM modulation with H.264 coding.
- Support of multiple input formats (from 720p to 1080p).
- Selectable bandwidth: 6/7/8 MHz
- Frequency range: 50 ÷ 860 MHz.
- Output signal level adjustable between 70 and 100dB£V.
- Alphanumeric display of 16x2 characters.
- 2K and 8K carriers.
- Easy programming.
- Ready for wall mounting.
Especificaciones
| Model/Reference | HTT 103/86541 |
| VIDEO ENCODING | H.264 |
| Inputs | HDMI x 1 + RF |
| Resolution | 1920*1080_60p; 1920*1080_50p; |
| AUDIO ENCODING | MPEG1 layer II |
| MODULATION STANDARD | EN300744 |
| FFT mode | 2K, 8K |
| Bandwidth, MHz | 6, 7, 8 |
| Constellation | 64 QAM |
| Guard Interval | 1/32 |
| FEC | 7/8 |
| MER, dB | >34dB |
| RF Frequency, MHz | 50 ÷ 860 |
| RF output level, dBμV | 70 ÷ 100, step 1dBμV |
| Programming | LCD + teclas de programación |
| Power Supply | 12V / 1,5A |
| Dimensions, mm | 125 x 100 x 28 |
| Weight, kg | 0,3 |
Safety instructions
Before starting the installation of this equipment, observe the following safety instructions:
- Read this manual carefully.
- Moving this device from a cold to a hot environment can cause problems. Turn off the equipment and turn it on an hour or two later to avoid overheating.
- Keep the modulator in a clean and ventilated environment.
- Do not cover the equipment or install it on a heat source.
- For cleaning use a soft cloth lightly moistened with cleaning fluid.
- Do not open the equipment.
- Do not expose the equipment to extreme cold or heat or humidity.
- Prevent liquids or other substances from entering the equipment.
Physical description
