CABLESCOM-FGP-244 F - Easy-to-use fiber with polyethylene coating (1 tube x 12 fibers)

CABLESCOM-FGP-244 F  - Easy-to-use fiber with polyethylene coating (1 tube x 12 fibers)

Anvimur Telecomunicaciones only supplies optical fibers manufactured in Europe, to offer its customers the highest quality assurance.

Application & Description

Ultra-compact outdoor fiber optic cables, with micromodule structure, polyethylene cover and peripheral fiberglass reinforcements. Designed for installation in ducts with pull or blow, up to 1.8 times the weight. These cables are designed for all types of telecommunication networks.

• Micromodules - Easy-to-strip rubber tubes, smaller diameter and weight, reels of 2Km
• Tube filled with water blocking gel repellent.
• The reduced weight and diameter make it easy to handle.

Polyethylene coating

• With water-blocking tapes and/or spinning tapes.
  
• The polyethylene cover provides optimum protection against external environmental factors.

Total electromagnetic compatibility

• The use of fully dielectric materials, allows electromagnetic compatibility with existing coaxial and power cables.

Type of installation

• This cable is designed for installation in ducts with pull or blow install, up to 1.8 times the weight.

Integrability

• This solution can integrate seamlessly into a complete deployment of FTTH network.

NOTE: Different fiber types available upon request settings. Fiber according to the ITU-T recommendations.

TECHNICAL SPECIFICATIONS

Cover marking

Dimensions and weights

* If you need other configurations, please contact our sales department

WARNING

ALTHOUGH THE PRICE IS SHOWN BY METER, FIBER OPTIC CABLE ROLLS ARE PROVIDED AT 2000 METERS LENGTH APPROXIMATELY.