Active optical cable with SFP+ 10G modules 2mts (7ft)

SFP+ Active Optical Cable (AOC) assemblies use active circuits to support longer distances than standard Passive or Active SFP+ Copper Cables.

They are designed for high speed, short range data link via optical fiber wire. SFP+ AOC cables provide high performance
Enhanced Small Form Factor Pluggable (SFP+) interface and it is a cost effective solution for Data Center/ storage and all short range data application.

These Active Optical Cable (AOC) can be used as an alternative solution to SFP+ passive and active copper cables, while providing improved signal integrity, longer distances, superior electromagnetic immunity and better bit error rate performance.

See technical specifications, here

Application

• 10 Gigabit Ethernet (10GbE).
• 1x InfiniBand QDR, DDR, SDR.
• 1 / 2 / 4 / 8G Fibre Channel (1 / 2 / 4 / 8GFC), Fibre Channel.
• Cost effective 10G SFP+ link solution.
• System cascade applications.
• System Internal data link solution.
• Proprietary high speed, high density data transmission.
• Switch and router high speed backplane interconnect.
• High performance computing, server and data storage.

Specifications

• Support up to 10 Gb/s bi-directional operation.
• 850nm VCSEL transmitter, PIN photo-detector receiver, up to 300m on OM3 MMF.
• Cable type: Active Optical Cable.
• Available lengths (in meters): 1, 2, 3, 4, 5....
• Hot-pluggable SFP+ cable ends.
• Commercial temperature range(COM): 0 to 70°C.
• Low power consumption: less than 1.0 W per end.
• Bend insensitive fiber.
• Single 3.3V power supply.
• All-metal housing for superior EMI performance.
• I2C standard management interface.
• Electrical interface compliant to SFF-8431.
• Compliant to industrial standard SFP MSA