OPTRAL-LSZH-2F – CAS FTTH – Kevlar + LSZH cover (1 tubes x 2 fibers)

Anvimur Telecomunicaciones only supplies optical fibers manufactured in Europe, to offer its customers the highest quality assurance.

Type of installation

• Direct connection in FTTH
• Recommended for use in FTTH supply and distribution network for indoor vertical distribution, in wall ducts and communication areas.
• indoor use
• Moisture protected, high flexibility, flame retardant, low smoke and halogen free

Sheathing

• LSZH cover (Low Smoke Zero Halogen) with aramid (Kevlar)
• easy strip rubber tubes
• Ultraflexible cable with low diameter. Easy handling and slitting , based on micro modules without gel. It supports low radius bending. Flame retardant materials that slow flame spread.

Total electromagnetic compatibility

• The use of fully dielectric materials, allows electromagnetic compatibility with existing coaxial and power cables.

Integrability

• This solution can integrate seamlessly into a complete deployment of FTTH network and can be complemented with drop cables, Splitters, loose tube cable for trunk and access network, termination boxes, splice closures and patchcords.

Advantages

• Flexible / Dielectric / Direct connectorization.

NOTE: Different fiber types available upon request settings. Fiber according to the ITU-T recommendations. WB dry core and SZ wiring.

TECHNICAL SPECIFICATIONS

Dimensions and weights

Mechanical and Environmental tests according to IEC 60794-1-21 and IEC 60794-1-22.
Fibres colour code : 2 FO: Red – Green.

This fiber is supplied in a 500m reel whose dimensions and weight make it very easy to transport:

     Dimensions: 35x35x35 cm
     Weight: 8 Kg

* If you need other configurations, please contact our sales department