Aluminum Aerial anchoring clamps


New product

Anchoring clamps for aerial fibre optic cables in short span (100 m max.)

For Ø 10-14 mm cables

minimum breaking load 1500 daN

More details

Add to wishlist

Data sheet

AccessoriesCable ties and Anchor fixings

More info

Anchoring clamps for aerial fiber optics lines with neutral fastener

Consisting of:

• A high strenght aluminum alloy body.

• Two U.V. protected synthetic wedges.

• A stainless steel flexible cable with insulating material anchor protection thimbles and aluminum alloy tips. All components are safety pins, corrosion resistant in industrial environment and saltiness environment resistant.


  • Light and compact termination for 10 to 14 mm ADSS cables
  • Termination for ADSS cables 10 to 14 mm light and compact
  • Minimum breaking load of 1,500 daN.
  • Installation on any type of pole: brackets, crossarms or eyebolt with a diameter of 15 mm
  • 4 Kv protection
  • All aluminum alloy parts of high mechanical strength.
  • U.V. protected synthetic wedges tested in conditions equivalent to min 25 years of service in tropical environment
  • Install in seconds
  • The flexible fastener provides additional protection for the cable against vibrations

These anchoring clamps are made of an open conical body, a pair of plastic chocks and a flexible fastener equipped with a aislante. The fastener can be locked in the clamp body, once passed through the pole bracket and re-opened manually at any time when the clamp is not fully loaded.
All parts are fixed together to avoid any loss during installation.