Point to Point wireless link SAF INTEGRA-E


New product

10Gbps Outer radio, full-duplex Gigabit Ethernet for IP networks.

More details

Add to wishlist

Data sheet

Licensed BandSAF Tehnika

More info

Point to Point wireless link SAF INTEGRA-E

SAF Tehnika with over 20 years of microwave point-to-point radio design and manufacturing experience is pleased to introduce the newest member of the Integra family of radios. The Integra-E: Having the same Integra family characteristics of high-reliability, carrier grade features and performance, and 5-year warranty extends the Integra family into the E-band frequencies, delivering 10 Gbps capacity.

The Integra-E supports Adaptive Code Modulation and Baud (ACMB) in which the coding rate, modulation and bandwidth changes are set in real time based on the link’s conditions. This feature enables significant increase in payload capacity and link availability. ACMB switching is hitless, that is, the link stays locked, and data is transmitted without errors.

In most countries E-band radios are easy to deploy with no or minimal licensing requirements. Reducing time to deployment and reducing Total Cost of Ownership (TCO).


Concept / form factorFull Out Door Unit with split-fit antenna
Frequency band71 - 76 GHz paired with 81 - 86 GHz
Duplex spacing10 GHz
Frequency stability± 10 ppm
CapacityUp to 10 Gbps at 2000 MHz 128QAM
ACMBAdaptive Code Modulation and Baud (ACMB), Hitless
Channel bandwidth62.5, 125, 250, 500, 1000, and 2000 MHz


Ethernet2 x SFP+For Fiber Optics up to 10 Gbps (1, 2.5 and 10 Gbps speed supported)
1 x RJ-45Gigabit Ethernet electrical port with built-in PoE splitter and surge arrestor
PowerDC portScrew type terminal block, pluggable, 2 pin, centerline 5.08mm / 0.2 inches
Service port3.5 mmAudible alignment and RSSI
USB BRS232 serial over USB B-Type
LEDPower On, RSL
AntennaSAF2Circular waveguide flange Ø 3.18 mm


EthernetBuilt-in Carrier Ethernet 10 Gigabit Switch
Gigabit Switch functionality802.1Q VLANs with QoS/CoS incl. WRED*, shaping, DWRR and on MPLS-TP exp. bit*;
Spanning Tree Protocol*, Jumbo frames and more*
SynchronizationSyncE, IEEE 1588v2 PTP*
Carrier Ethernet functionality
Provider Bridging*, MEF9&14*, OAM*
Jumbo framesYes, 12288 bytes
ManagementSNMP v1/2c/3, SSH, Telnet, HTTPS, Serial, RADIUS, Network Time Protocol
In-band Management over same ETH port. Out-band Management is configurable using VLANS.
Performance monitoringPerformance graphs, constellation diagram, alarms, detailed counters


Power consumptionUp to 50 W
Voltage range36…57 V DC
Temperature range-33...+55 °C / -28…+130 °F

Mechanical & Environmental

Stationary useConforms to ETSI EN 300 019 Class 4.1, IP66, NEMA 4X
Size280 x 437 x 100 mm / 11.02” x 17.2” x 3.9”
Weight6.5 kg / 14.3 lbs
MountMount on antenna
AntennaExternal antenna, direct-mount with SAF2 adaptation

* Request a quote to tecnico@anvimur.com

Integra-E Configuration and Installation video series