LigoDLB 5, 5 Ghz, MIMO, directional antenna 15 dBi (27dBi with dish)

The DLB ECHO 5 was designed for cost-effective and long distance connectivity (up to 50 km). It has a unique mounting system designed to utilize standard satellite offset dish antennas to provide increased system gain and distance. These antennas are readily obtainable in most countries, thereby reducing freight and inventory costs. The aluminum housing improves RF performance, allowing solid communications in interference laden environments as well as providing strength against the elements.
The product is equipped with a high output power MIMO radio (up to 29 dBm) and when coupled to a 60 cm offset satellite dish antenna it is ideal for ultra long range wireless communication.
The enclosure is made of aluminum and polycarbonate plastic with UV inhibitors to provide years of outdoor exposure in direct sunlight without cracking and survive in harsh weather conditions. Environmentally tested to meet an IP-67 rating as well as vibration, temperature, drop, salt, fog, and electrical surge standards to ensure a high level of reliability and backed by a two-year warranty. It is equipped with a grounding lug and a grounded 24-volt PoE to allow a professional installation, resistant to electrical surges.

Highlights:

• 5.150 - 5.850 GHz (FCC 5.725 - 5.850 GHz)
• 80,000 PPS
• 170 Mbps capacity
• High output power 29 dBm radio
• Directional offset dish antenna (27 dBi)  or an integrated panel antenna (15 dBi)
• Powerful OS
• Smart polling data transmission protocol (iPoll 2)
• Meets IP – 67 certification
• Free WNMS (WNMS – Wireless Network Management System)
• Responsive HTML 5 based GUI
• Pole mounting option

Distance recommendations

With integrated panel antenna

• Modo PTP -> 7 km
• Modo PTMP -> 5 km 
  

With offset dish

• Modo PTP -> 50 km
• Modo PTMP -> 17 km 

New Hardware platform

Powerful new generation CPU ensures better performance delivering higher up to 170 Mbps capacity and almost 2 X higher packet per second rate (80000). Narrow (5 and 10 MHz) channel support ensures steady performance in noisy environments. More RAM improves the performance with multiple users connected to a single base-station and larger flash stores a 2nd failover firmware image.

Integrated surge protection

3 kV line to ground and 1 kV line-to-line protection allows operating in a harsh weather conditions and unstable electrical installations.

New OS

New operating system includes all the essential features for point-to-multipoint networks. User interface is built using HTML 5 technology with responsive design. Among the new features there are IPv6 bridge and router support, SSDP and Bonjour device discovery options, flexible traffic shaping and SSTP client. New generation DLB devices are backwards compatible with APC series from Deliberant even when using iPoll protocol. In order to achieve this a new firmware image has to be installed on all APC devices (v7.0 or later).

iPoll 3 – enhanced performance protocol

LigoWave’s iPoll™ PTMP (Point to Multi-Point) proprietary protocol is an innovative solution to eliminate transmission congestion and close cluster interference created in PTMP wireless installations.