No products
Prices are tax excluded
Optical Fibre
Catalog
New products
-
NVR VIGI TP-LINK NVR2016H 16-Channel
IP Video Recorder TP-LINK VIGI NVR2016H NVR VIGI with 16 channels...
136,00 € -
Adapter H/H for MINI SC Corning connector
Adapter compatible with Corning H/H connector for Torpedoes and Optical...
5,59 € -
SFP MODULE BIDIRECTIONAL LC SM 10KM TX1310/RX1550 1.25G | Tp-Link
Bidirectional SFP Module 1000Base-BX WDM | Tp-LinkReference: TL-SM321A
16,00 € -
SFP MODULE BIDIRECTIONAL LC SM 10KM TX1550/RX1310 1.25Gb | Tp-Link
Bidirectional SFP Module 1000Base-BX WDM | Tp-LinkReference: TL-SM321A
16,00 €
Optical Fibre There are 693 products.
1550nm optical transmitter , 6 dB output
Optical transmitter converts the RF signal (coaxial) to optical signal (PON) in the 1550 nm wavelength. AGc/MGC (Automatic/Manual Gain Control) Direct modulation 6dB optical output power. useful for transmitting CATV through the GPON network.
832,47 €In Stock16 GPON C+ Board for MA5800 Huawei OLT
H901GPHF Board is a 16-port GPON interface OLT. It works with the optical network terminal (ONT) to provide the GPON access service.
1 044,00 €In Stock1550nm optical transmitter , 6 dB double...
Optical transmitter converts the RF signal (coaxial) to optical signal (PON) in the 1550 nm wavelength. AGc/MGC (Automatic/Manual Gain Control) Direct modulation Two 6dB optical output power. Redundant Power supply useful for transmitting CATV through the GPON network.
1 183,29 €In Stock16 GPON C++ Board for MA5800 Huawei OLT
H901GPHF Board is a 16-port GPON interface OLT. It works with the optical network terminal (ONT) to provide the GPON access service.
1 256,32 €In StockONU Huawei EA5821| 10G GPON/GPON 24GE (PoE)
The SmartAX EA5821 is a Remote Optical Access EquipmentIn the upstream direction, the EA5821 provides an SFP uplink optical port that supports XG-PON or GPON upstream transmission. In the downstream direction, the EA5821 provides 24 GE electrical ports POE.
1 284,00 €In StockEXFO EX1 Bandwidth Speed Tester
Pocket bandwidth speed test tester.Quickly and accurately test line speeds up to 1 Gigabit Ethernet.It supports functionalities such as Ping, Traceroute, TWAMP protocol, IPTV validations.... It also performs start-up testing of Ethernet services activation (Y.1564).
1 377,00 €In StockEyDFA Amplifier Multi-ports 8 port 19dB
EYDFA Amplifier (Erbium-Ytterbium Doped Fiber Amplifier) for amplifying the 1550nm wavelength with CWDM built-in. 8 outputs with 38 dBm total power, 19 dBm each port. Ideal to amplify and multiplex to a single optical output the signal from a CATV optical transmitter (1550nm) with the signal from the OLT (1310 / 1490nm)
1 583,46 €In Stockprolite-105 Triple wavelength LASER source
Triple laser source for certification of optical fibers for FTTH in 1310, 1490 and 1550 nm wavelengths.
1 590,00 €In StockRANGER mini: TV and Satellite analyzer for...
RANGER mini. CATV analyzer for hybrid fiber and coaxial cable networks. It offers the main measures required for subscriber registration in the modern DOCSIS 3.0 and DOCSIS 3.1 networks. Touch screen, Easy to use, Screenshots, Photo gallery, Datalogger, Ethernet ...
1 690,00 €In StockFujikura 31s compact Fibre Optic Fusion...
The Fujikura 35SKIT fusion splicer is the smallest, lightest, and most portable splicer in the market.Ideal for FTTH or remote locations.Reference: FSM-35SKIT
1 795,00 €In StockEDFA amplifier, 16 outputs x 19 dB,...
EYDFA Amplifier (Erbium-Ytterbium Doped Fiber Amplifier) for amplifying the 1550nm wavelength with CWDM built-in. 16 outputs with 38 dBm total power, 19 dBm each port Ideal to amplify and multiplex to a single optical output the signal from a CATV optical transmitter (1550nm) with the signal from the OLT (1310 / 1490nm)
1 802,37 €Out of stockPON Power Meter EXFO PPM-352C-EA-EUI91
Highly versatile handheld power meter that enables quick, on-site testing of all PON signals, anywhere on the network.
1 928,00 €Manufactures on-demand delivery within 4 weeks4 in 1 optic and UTP tester
4 in 1 Fiber optic power & UTP multi-tester (Fiber optical power meter, Visual Fault Locator, UTP Cable tester and LED flashlight) USB connector for rechargeable battery charge
1 990,00 €In StockFibre optics “Low Cost” Measurement kit
LOW COST measurement kit comprising a PROLITE-55 source of light and PROLITE-57 meter Includes calibration Patch Cords and carrying case
2 060,00 €In StockANGUILA Industrial 11 mm tape fibreglass +...
Suitable for outdoor installations in industrial estates, road infrastructures and urban networks where the conduit used is of a larger diameter and with long distances to travel.Ref: FO-31118200
2 090,00 €In StockEDFA amplifier, 32 outputs x 19 dB,...
EYDFA Amplifier (Erbium-Ytterbium Doped Fiber Amplifier) for amplifying the 1550nm wavelength with CWDM built-in. 32 outputs with 38 dBm total power, 19 dBm each port Ideal to amplify and multiplex to a single optical output the signal from a CATV optical transmitter (1550nm) with the signal from the OLT (1310 / 1490nm)
2 390,00 €In StockOLT Huawei MA5800-X7 48V 16 PON C+ 10Gb
Chassis MA5800 X7 with redundant system, for FTTH providers deployments, possibility to serve up to 112 PON, about 7.168 clients per chassis in 1:64 Split
PROLITE-67: Selective optical power meter...
Selective meter in 1310-1490-1550 nm wavelength and optical measures in RFoG and xPON networks
2 460,00 €In StockFujikura 45s compact Fibre Optic Fusion...
The Fujikura 45S fusion splicer is the smallest, lightest, and most portable splicer in the market.Ideal for FTTH or remote locations.Reference: FSM-45SKIT WATCH VIDEO
2 495,00 €In StockSumitomo T-502S Splicer KIT
Sumitomo T-502S Splicer KIT Premium fusion splicer with active alignment by optical fibre claddingAnalyses the core during splicing by Artificial Intelligence
2 515,50 €In StockOutdoor Distribution Cabinet FTTH for 18U...
Outdoor Distribution Cabinet FTTH for 18U with air conditioning
2 590,00 €In StockPROLITE-50B, Single mode micro OTDR...
Double wavelength (1310 and 1550 nm) optical reflectometer, 28 dB dynamic range. To detect faults located in any point of the fiber and know exactly where is the problem. 012-PROLITE-50B
2 620,00 €In StockOLT Huawei MA5800-X15 48V 16 PON C+ 10Gb
Chassis MA5800 X15 with redundant system, for FTTH providers deployments, possibility to serve up to 240 PON, about 15.340 clients per chassis in 1:64 Split
PROLITE 42 Compact Fibre Optic Fusion Splicer
The ultra-thin PROLITE42 fusion machine meets the highest quality requirements: Fusion in 8 seconds Core alignment Removable battery Range of up to 300 mergers Includes tools Compact and lightweight
2 780,00 €In StockOLT Headend Huawei MA5800 X2 48V 16 PON C+
Chassis MA5800 X2 for deployments in Hotels, Residential, small projects, possibility to serve up to 32 PON, about 2048 clients per chassis in 1:64 Split.
EyDFA XGS-PON 32-port x 19 dB WDM laser...
32 outputs with 36dBm total power and 19dBm per port, JDSU laser.EYDFA (Erbium-Ytterbium Doped Fiber Amplifier) amplifier to amplify the 1550nm lambda with built-in 1310/1490/1270/1577nm WDM multiplexer.
2 870,00 €In StockEyDFA XGS-PON 32-port x 22 dB WDM laser...
32 outputs with a total power of 36 dBm and 22 dBm per port, JDSU laser. 220V Erbium-Ytterbium Doped Fiber Amplifier (EYDFA) to amplify the 1550 nm wavelength with built-in WDM multiplexer 1310/1490/1270/1577 nm for XGS-PON. Reference: FO-EYDFA32X22-10G
2 890,00 €In StockEyDFA XGS-PON 48-port x 21 dB WDM laser...
48 outputs with a total power of 36 dBm and 21 dBm per port, JDSU laser. 220V Erbium-Ytterbium Doped Fiber Amplifier (EYDFA) to amplify the 1550 nm wavelength with built-in WDM multiplexer 1310/1490/1270/1577 nm for XGS-PON. Reference: FO-EYDFA48X21-220V
2 900,00 €In StockOptical Xplorer OX1 EXFO Optical Multimeter
First optical fiber multimeter Optical Xplorer OX1 EXFO (OFM) on the market, capable of automatically finding and analyzing faults. Saves time by scanning and validating link quality in seconds, assigning a ratio of one to five stars using the EXFO function Advisor™ (patented) using sophisticated algorithms at the touch of a button. Reference: xxxx
OLT Huawei SmartAX MA5801-GP08-H2 | 8 GPON...
Chasis Huawei OLT SmartAX MA5801-GP08-H2, 8 GPON ports. FO-MA5801-GP08
EyDFA XGS-PON 64-port x 21 dB WDM laser...
64 outputs with a total power of 36 dBm and 21 dBm per port, JDSU laser. 220V Erbium-Ytterbium Doped Fiber Amplifier (EYDFA) to amplify the 1550 nm wavelength with built-in WDM multiplexer 1310/1490/1270/1577 nm for XGS-PON. Reference: FO-EYDFA64X21-220V
3 100,00 €In StockPROLITE 41 Compact Fibre Optic Fusion Splicer
Compact Fusion Splicer with fibre core alignment Fusion of SM, MM, DS and NZDS fibres High resolution adjustable 4.3” LCD screen Lithium 11.1V user replaceable battery Include with carrying case and accessories This is the fastest fusion splicer on the market: 7 s fusion, 25 s heating
3 440,00 €In Stock30U Outdoor FTTH Distribution Cabinet with...
30U Outdoor FTTH Distribution Cabinet with Air Conditioner. FO-FTTH30UA
3 450,00 €In StockOLT Headend Huawei MA5800 X2 220V 16 PON C+
Chassis MA5800 X2 for deployments in Hotels, Residential, small projects, possibility to serve up to 32 PON, about 2048 clients per chassis in 1:64 Split.
PPM-350D - next-gen PON power meter
EXFO's PPM-350D - next-gen PON power meterCompatible with GPON and EPON networks (GPON, EPON, XG-PON, XGS-PON, NG-PON2, 10G-EPON)
FITEL® S179 Fusion Splicer
The FITEL S179 Hand-Held, Core Alignment Fusion Splicer offers powerful performance, delivering fast and reliable optical fiber splicing even under harsh environmental conditions.Reference: FSM-S179A21KIT
4 720,00 €In StockFUJIKURA 90S+ Fusion Splicer, Core Alignment
The 90S+ is packed with a whole host of new and enhanced features specifically developed with the objective of enabling the user to work faster with higher precision. SM splicing time from 7 to 8 seconds, heating time for melting sleeve from 9 to 10 seconds, electrode life 5.000 uses.
4 995,00 €In StockService Card with 16 SFPs XGS-PON & GPON...
The H902CSHF card is an interface card for the Huawei MA5800X Combo XGS-PON and GPON 16-port C+ OLT range that allows simultaneous operation of XGS-PON and GPON ONTs on the same PON port. FO-H902CSHF
OTDR EXFO MAX-730D-SM8
Fully featured, entry-level, dedicated OTDR with tablet-inspired design, suitable for metro and optimized to test through optical splitters, for seamless end-to-end FTTH characterization and troubleshooting.
5 500,00 €Manufactures on-demand delivery within 72 hoursFIP-400B USB - fiber inspection probe
FIP-400B USB - fiber inspection probe These intelligent and automated test tools transform fiber inspection into a faster and simplified one-step process providing accurate and consistent test results, and preventing the reporting of false-positive results.
LanTEK III Certifier for Copper
The LanTEK III cable certifier brings a new standard to the industry, saving you time and improving profitability. It’s time to change the way you certify. The future of copper and fibre cable certification. Ref: FO-LantekIII
LanTEK IV cable certifier
The LanTEK IV cable certifier brings a new standard to the industry, saving you time and improving profitability. It’s time to change the way you certify. The future of copper and fibre cable certification. Ref: FO-LantekIV
